JAMB Syllabus For Physics 2024/2025

JAMB Syllabus For Physics 2024/2025: Are you one of the candidates that selected Physics when registering for JAMB 2023? If yes, you need to sit tight and read this short article that will serve a long purpose. It is essential to do a lot of researches about the subjects you will be offering in the UTME examination. Well, for you to be on this page, that means you have already started your findings. That great!! The JAMB syllabus for Physics will be fully discussed on this page, all information you need to know about the Physics syllabus will not be left behind.

JAMB Syllabus For Physics 2024/2025

Moving forward, the syllabus is the easiest and convenient way to get relevant information regarding each subject’s Objectives, Topics, Contents, Notes, and Recommended Textbooks. Without wasting much of your time, let’s get into the real topic. Here, you will find the JAMB Syllabus for Physics! Read through this post and you can also download the PDF! 

See all you need to about JAMB Subjects Combination for all Courses

However, before I move to the syllabus for Physics, a little introduction to the meaning of Syllabus is essential to discuss.

What is Syllabus?

A syllabus in term means a document that outlines the contents of a course or program of study. To proceed further, the syllabus serves as a roadmap for students, providing them with a clear understanding of what will be covered in the course and what is expected of them in terms of attendance, participation, and performance.

Latest new on JAMB Physics syllabus 2023

This is to Inform the general public most especially those that are going to participate in the 2023 Unified Tertiary Matriculation Examination UTME that the Joint Admission and Matriculation Board JAMB has released the syllabus for Physics for the 2023 UTME.

JAMB Physics Syllabus for 2023 UTME

Try to get to the bottom of this post to see the JAMB recommended Textbook for Physics! Get a Textbook and read! Also, try to make sure you practice JAMB Past Questions so as to familiarize yourself with the way JAMB sets questions! Hope you have noticed those tips on how to get a high score in JAMB 2023?

Jamb Physics Syllabus 2024/2025 General Objective

The aim of the Unified Tertiary Matriculation Examination (UTME) syllabus in Physics is to prepare the candidates for the Board’s examination. It is designed to test their achievement of the course objectives, which are to:

(1) sustain their interest in physics;

(2) develop attitude relevant to physics that encourage accuracy, precision, and objectivity;

(3) interpret physical phenomena, laws, definitions, concepts and other theories;

(4) demonstrate the ability to solve correctly physics problems using relevant theories and concepts.

Jamb Syllabus for Physics 2024/2025

1. Measurement & Unit

(a) Length area and volume: Metre rule, Vernier calipers Micrometer Screw-gauge

(b) Mass:

(i) unit of mass

(ii) use of simple beam balance

(c) Time:

(i) unit of time

(ii) time-measuring devices

(d) Fundamental physical quantities

(e) Derived physical quantities and their units

(i) Combinations of fundamental quantities and determination of their units

(f) Dimensions

(i) definition of dimensions

(ii) simple examples.

(g) Limitations of experimental measurements

(i) accuracy of measuring instruments

(ii) simple estimation of errors.

(iii) significant figures.

(iv) standard form.

2. Scalars and Vectors

(i) definition of scalar and vector quantities

(ii) examples of scalar and vector quantities

(iii) relative velocity

(iv) resolution of vectors into two perpendicular directions including graphical methods of solution.

3. Motion

(a) Types of motion: translational, oscillatory, rotational, spin and random

(b) linear motion

(i) speed, velocity and acceleration

(ii) equations of uniformly accelerated motion

(iii) motion under gravity

(iv) distance-time graph and velocity time graph

(v) instantaneous velocity and acceleration.

(c) Projectiles:

(i) calculation of range, maximum height and time of fight

(ii) applications of projectile motion

(d) Newton’s laws of motion:

(i) inertia, mass and force

(ii) relationship between mass and acceleration

(iii) impulse and momentum

(iv) conservation of linear momentum

(Coefficient of restitution not necessary)

(e) Motion in a circle:

(i) angular velocity and angular acceleration

(ii) centripetal and centrifugal forces.

(iii) applications

(f) Simple Harmonic Motion (S.H.M):

(i) definition and explanation of simple harmonic motion

(ii) examples of systems that execute S.H.M

(iii) period frequency and amplitude of S.H.M

(iv) velocity and acceleration of S.H.M

(v) energy change in S.H.M

4. Gravitational field

(i) Newton’s law of universal gravitation

(ii) gravitational potential

(iii) conservative and non-conservative fields

(iv) acceleration due to gravity [g=GM / R]

(iv) variation of g on the earth’s surface

(v) distinction between mass and weight

(vi) escape velocity

(vii) parking orbit and weightlessness

5. Equilibrium of Forces

(a) equilibrium of a particles:

(i) equilibrium of coplanar forces

(ii) triangles and polygon of forces

(iii) Lami’s theorem

(b) principles of moments

(i) moment of a force

(ii) simple treatment and moment of a couple (torgue)

(iii) applications

(c) conditions for equilibrium of rigid bodies under the action of parallel and non-parallel forces:

(i) resolution and composition of forces in two perpendicular directions,

(ii) resultant and equilibrant

(d) centre of gravity and stability

(i) stable, unstable and neutral equilibrium

6. Work Energy and Power

(i) definition of work, energy and power

(ii) forms of energy

(iii) conservation of energy

(iv) qualitative treatment between different forms of energy

(v) interpretation of area under the force distance curve

7. Friction

(i) static and dynamic friction

(ii) coefficient of limiting friction and its determination.

(iii) advantages and disadvantages of friction

(iv) reduction of friction

(v) qualitative treatment of viscosity and terminal viscosity.

(vi) stoke’s law.

8. Simple Machines

(i) definition of machine

(ii) types of machines

(iii) mechanical advantage, velocity ratio and efficiency of machines

9. Elasticity

(i) elastic limit, yield point, breaking point, Hooke’s law and Young’s modulus

(ii) the spring balance as a device for measuring force

(iii) work done in springs and elastic strings

10. Pressure

(a) Atmospheric Pressure:

(i) definition of atmospheric pressure

(ii) units of pressure (S.I) units

(iii) measurement of pressure

(iv) simple mercury barometer, aneroid barometer and manometer.

(v) variation of pressure with height

(vi) the use of a barometer as an altimeter.

(b) Pressure in liquids:

(i) the relationship between pressure, depth and density (P = ρgh)

(ii) transmission of pressure in liquids (Pascal’s Principle)

(iii) application

11. Liquids at Rest

(i) determination of density of solid and liquids

(ii) definition of relative density

(iii) upthrust on a body immersed in a liquid

(iv) Archimede’s principle and law of flotation and applications, e.g. ships and hydrometers.

12. Temperature and Its Measurement

(i) concept of temperature

(ii) thermometric properties

(iii) calibration of thermometers

(iv) temperature scales –Celsius and Kelvin.

(v) types of thermometers

(vi) conversion from one scale of temperature to another

13. Thermal Expansion

(a) Solids:

(i) definition and determination of linear, volume and area expansivities

(ii) effects and applications, e.g. expansion in building strips and railway lines

(iii) relationship between different expansivities

(b) Liquids:

(i) volume expansivity

(ii) real and apparent expansivities

(iii) determination of volume expansivity

(iv) anomalous expansion of water

14. Gas Laws

(i) Boyle’s law (PV = constant)

(ii) Charle’s law ( V/P = constant)

(iii) Pressure law ( P/T = constant )

(iv) absolute zero of temperature

(v) general gas equation ( PV/T = constant )

(vi) ideal gas equation (Pv = nRT)

15. Quantity of Heat

(i) heat as a form of energy

(ii) definition of heat capacity and specific heat capacity of solids and liquids

(iii) determination of heat capacity and specific heat capacity of substances by simple methods e.g method of mixtures and electrical method

16. Change of State

(i) latent heat

(ii) specific latent heats of fusion and vaporization;

(iii) melting, evaporation and boiling

(iv) the influence of pressure and of dissolved substances on boiling and melting points.

(v) application in appliances

17. Vapours

(i) unsaturated and saturated vapours

(ii) relationship between saturated vapour pressure (S.V.P) and boiling

(iii) determination of S.V.P by barometer tube method

(iv) formation of dew, mist, fog, and rain

(v) study of dew point, humidity and relative humidity

(vi) hygrometry; estimation of the humidity of the atmosphere using wet and dry bulb hygrometers.

18. Structure of Matter and Kinetic Theory

(a) Molecular nature of matter

(i) atoms and molecules

(ii) molecular theory: explanation of Brownian motion, diffusion, surface tension, capillarity, adhesion, cohesion and angles of contact

(iii) examples and applications.

(b) Kinetic Theory

(i) assumptions of the kinetic theory

(ii) using the theory to explain the pressure exerted by gas, Boyle’s law, Charles’ law,

melting, boiling, vapourization, change in temperature evaporation, etc.

19. Heat Transfer

(i) conduction, convention and radiation as modes of heat transfer

(ii) temperature gradient, thermal conductivity and heat flux

(iii) effect of the nature of the surface on the energy radiated and absorbed by it.

(iv) the conductivities of common materials.

(v) the thermos flask

(vii) land and sea breeze

20. Waves

(a) Production and Propagation:

(i) wave motion,

(ii) vibrating systems as source of waves

(iii) waves as mode of energy transfer

(iv) distinction between particle motion and wave motion

(v) relationship between frequency, wavelength and wave velocity (V=f λ)

(vi) phase difference

(vii) progressive wave equation e.g y = A sin 2π/λ (vt + x)

(b) Classification:

(i) types of waves; mechanical and electromagnetic waves

(ii) longitudinal and transverse waves

(iii) stationary and progressive waves

(iv) examples of waves from springs, ropes, stretched strings and the ripple tank.

(c) Characteristics / Properties:

(i) reflection, refraction, diffraction and plane Polarization

(ii) superposition of waves e.g interference

21. Propagation of Sound Waves

(i) the necessity for a material medium

(ii) speed of sound in solids, liquids and air;

(iii) reflection of sound; echoes, reverberation and their applications

(iv) disadvantages of echoes and reverberations

22. Characteristics of Sound Waves

(i) noise and musical notes

(ii) quality, pitch, intensity and loudness and their application to musical instruments;

(iii) simple treatment of overtones produced by vibrating strings and their columns

Fo= 1/2L Square root T/M

(iv) acoustic examples of resonance

(v) frequency of a note emitted by air columns in closed and open pipes in relation to their lengths.

23. Light Energy

(a) Source of Light:

(i) natural and artificial source of light

(ii) luminous and non-luminous objects

(b) Propagation of light:

(i) speed, frequency and wavelength of light

(ii) formation of shadows and eclipse

(iii) the pin-hole camera.

24. Reflection of Light at Plane and Curved Surfaces

(i) laws of reflection.

(ii) application of reflection of light

(iii) formation of images by plane, concave and convex mirrors and ray diagrams

(iv) use of the mirror formula

l/F = I/U + I/V

(v) linear magnification

25. Refraction of Light Through

(a) Plane and Curved Surface:

(i) explanation of refraction in terms of velocity of light in the media.

(ii) laws of refraction

(iii) definition of refractive index of a medium

(iv) determination of refractive index of glass and liquid using Snell’s law

(v) real and apparent depth and lateral displacement

(vi) critical angle and total internal reflection

(b) Glass Prism:

(i) use of the minimum deviation formula u=sin A+D/2 / A/2.

(ii) type of lenses

(iii) use of lens formula

l = l + l

f u v

(iv) magnification

26. Optical Instruments

(i) the principles of microscopes, telescopes, projectors, cameras and the human eye (physiological details of the eye are not required)

(ii) power of a lens

(iii) angular magnification

(iv) near and far points

(v) sight defects and their corrections

27. (a) dispersion of light and colours

(i) dispersion of white light by a triangular prism

(ii) production of pure spectrum

(iii) colour mixing by addition and subtraction

(iv) colour of objects and colour filters

(b) electromagnetic spectrum

(i) description of sources and uses of various types of radiation.

28. Electrostatics

(i) existence of positive and negative charges in matter

(ii) charging a body by friction, contact and induction

(iii) electroscope

(iv) coulomb’s inverse square law electric field and potential

(v) electric field and potential

(vi) electric discharge and lightning

29. Capacitors

(i) functions of capacitors

(ii) parallel plate capacitors

(iii) capacitance of a capacitors

(iv) the relationship between capacitance, area separation of plates and medium between the plates. C = 3A/d

(v) capacitors in series and parallel

(vi) energy stored in a capacitor

30. Electric Cells

(i) simple voltaic cell and its defects;

(ii) Daniel cell, Leclanche cell (wet and dry)

(iii) lead –acid accumulator and Nickel-Iron (Nife) Lithium lon and Mercury cadmium

(iv) maintenance of cells and batteries (detail treatment of the chemistry of a cell is not required

(v) arrangement of cells

31. Current Electricity

(i) electromagnetic force (emf), potential difference (p.d.), current, internal resistance of a cell and lost Volt

(ii) Ohm’s law

(iii) measurement of resistance

(iv) meter bridge

(v) resistance in series and in parallel and their combination

(vi) the potentiometer method of measuring emf, current and internal resistance of a


32. Electrical Energy and Power

(i) concepts of electrical energy and power

(ii) commercial unit of electric energy and power

(iii) electric power transmission

(iv) heating effects of electric current.

33. Magnets and Magnetic Fields

(i) natural and artificial magnets

(ii) magnetic properties of soft iron and steel

(iii) methods of making magnets and demagnetization

(iv) concept of magnetic field

(v) magnetic field of a permanent magnet

(vi) magnetic field round a straight current carrying conductor, circular wire and solenoid

(vii) properties of the earth’s magnetic field; north and south poles, magnetic meridian and angle of dip and declination

(viii) flux and flux density

(ix) variation of magnetic field intensity over the earth’s surface

(x) applications: earth’s magnetic field in navigation and mineral exploration.

34. Force on a Current-Carrying Conductor in

a) Magnetic Field:

(i) quantitative treatment of force between two parallel current-carrying conductors

(ii) force on a charge moving in a magnetic field;

(iii) the d. c. motor

(iv) electromagnets

(v) carbon microphone

(vi) moving coil and moving iron instruments

(vii) conversion of galvanometers to ammeters and voltmeter using shunts and multipliers

35. (a) Electromagnetic Induction

(i) Faraday’s laws of electromagnetic induction

(ii) factors affecting induced emf

(iii) Lenz’s law as an illustration of the principle of conservation of energy

(iv) a.c. and d.c generators

(v) transformers

(vi) the induction coil

(b) Inductance:

(i) explanation of inductance

(ii) unit of inductance

(iii) energy stored in an inductor

(iv) application/uses of inductors

(c) Eddy Current:

(i) reduction of eddy current

(ii) applications of eddy current

36. Simple A. C. Circuits

(i) explanation of a.c. current and voltage

(ii) peak and r.m.s. values

(iii) a.c. source connected to a resistor;

(iv) a.c source connected to a capacitor capacitive reactance

(v) a.c source connected to an inductorinductive reactance

(vi) series R-L-C circuits

(vii) vector diagram

(viii) reactance and impedance of alternative quantities

(ix) effective voltage in an R-L-C circuits

(x) resonance and resonance frequency

37. Conduction of Electricity Through

(a) liquids:

(i) electrolytes and non-electrolyte

(ii) concept of electrolysis

(iii) Faraday’s law of electrolysis

(iv) application of electrolysis, e.g electroplating, calibration of ammeter etc.

(b) gases:

(i) discharge through gases (quantitative treatment only)

(ii) application of conduction of electricity through gases

38. Elementary Modern Physics

(i) models of the atom and their limitations

(ii) elementary structure of the atom;

(iii) energy levels and spectra

(iv) thermionic and photoelectric emissions;

(v) Einstein’s equation and stopping potential

(vi) applications of thermionic emissions and photoelectric effects

(vii) simple method of production of x-rays

(viii) properties and applications of alpha, beta and gamma rays

(xiii) half-life and decay constant

(xiv) simple ideas of production of energy by fusion and fission

(xv) binding energy, mass defect and Einsterin’s Energy equation

(xvi) wave-particle paradox (duality of matter)

(xvii) electron diffraction

(xviii) the uncertainty principle

39. Introductory Electronics

(i) distinction between metals, semiconductors and insulators (elementary knowledge of band gap is required)

(ii) intrinsic and extrinsic semi-conductors;

(iii) uses of semiconductors and diodes in rectification and transistors in amplification

(iv) n-type and p-type semi-conductors

(v) elementary knowledge of diodes and transistors

(vi) use of semiconductors and diodes in rectification and transistors in amplification.

Jamb Physics Syllabus Recommended Textbook

  • Nelkon, M (1977). Fundamentals of Physics, Great Britain: Hart-Davis Educational.
  • Nelkon, M and Parker, (1989). Advanced Level Physics (Sixth Edition), Heinemann
  • Okeke, P. N and Anyakoha, M. W (2000). Senior Secondary School Physics, Lagos: Pacific Printers
  • Olumuyionwa A. and Ogunkoya O. O (1992). Comprehensive Certificate Physics, Ibadan: University Press Plc.
  • Ike, E. E (2006). Essential Principles of Physics, Aba Enic Publishers
  • Ike, E. E (2005). Numerical Problems and Solutions in Physics, F = Ma Enic Publishers, Aba.

FAQs about JAMB Syllabus For Physics 2024/2025

Why Should follow JAMB Syllabus For Physics?

Following the physics syllabus in JAMB (Joint Admissions and Matriculation Board) is important for several reasons:

  1. Helps with exam preparation: The JAMB physics syllabus outlines the topics that will be covered in the exam, making it easier for students to focus their study efforts on the relevant material.
  2. Ensures completeness: By following the syllabus, students can be assured that they have covered all the necessary topics and that they have not missed any important concepts.
  3. Helps with time management: The JAMB physics exam is timed, and following the syllabus can help students manage their time better by knowing how much time they should allocate for each topic.
  4. Helps with exam success: The JAMB physics exam is designed to test students’ understanding of physics concepts, and following the syllabus can help students develop a better understanding of the material, leading to better performance in the exam.

To conclude it, following the JAMB physics syllabus is crucial for effective exam preparation, completeness, time management, and ultimately, exam success.

How Do I download JAMB Syllabus for Physics 2023?

To download the current JAMB Syllabus for physics, click the download button below.

Wrapping Up JAMB Syllabus for Physics 2023

That is all information we can provide for now, if this post is helpful kindly share it with someone who may need it. Best of luck moving forward to higher institution.

See other JAMB Related Posts

Leave a Comment